A Preliminary Study Exploring the Relationship between Occupational Health Hazards and Gut Microbiota among Firefighters.

Firefighters are exposed to occupational hazards and have a higher prevalence of health issues. The gut microbiota plays a crucial role in the immune, endocrine, and neural systems, and disruptions in its composition can impact health outcomes. This pilot study aimed to investigate the potential association between occupational factors, changes in gut microbiota, and the development of adverse health outcomes in firefighters. To test this hypothesis, we recruited 15 firefighters and age/sex-matched controls to investigate the relationship between occupational environment and gut microbiota. Firefighters exhibit lower intestinal bacterial alpha diversity and a higher presence of pathogenic bacteria than the control. Moreover, unique gut bacterial taxa were observed in firefighters with high post-traumatic stress disorder (PTSD) scores, which could contribute to immune dysregulation and higher susceptibility to pathogen colonization. These preliminary findings suggest that occupational factors, including exposure to traumatic stressors and chemicals, may influence firefighters' health by modulating their gut microbiota. The observed changes in gut microbiota composition and the potential link to occupational hazards highlight the need for further research in larger sample-size studies. Understanding the role of gut microbiota in firefighter health may have implications for preventive measures and interventions to mitigate occupational health risks and improve overall well-being.

Atomic Level Interactions and Suprastructural Configuration of Plant Cell Wall Polymers in Dialkylimidazolium Ionic Liquids.

Ionic liquids (ILs) have been widely investigated for the pretreatment and deconstruction of lignocellulosic feedstocks. However, the modes of interaction between IL-anions and cations, and plant cell wall polymers, namely, cellulose, hemicellulose, and lignin, as well as the resulting ultrastructural changes are still unclear. In this study, we investigated the atomic level and suprastructural interactions of microcrystalline cellulose, birchwood xylan, and organosolv lignin with 1,3-dialkylimidazolium ILs having varying sizes of carboxylate anions. Analysis by 13C NMR spectroscopy indicated that cellulose and lignin exhibited stronger hydrogen bonding with acetate ions than with formate ions, as evidenced by greater chemical shift changes. Small-angle X-ray scattering analysis showed that while both cellulose and xylan adopted a single-stranded conformation in acetate-ILs, twice as many acetate ions were bound to one anhydroglucose unit than to an anhydroxylose unit. We also determined that a minimum of seven representative carbohydrate units must interact with an anion for that IL to effectively dissolve cellulose or xylan. Lignin is associated as groups of four polymer molecules in formate-ILs and dispersed as single molecules in acetate-ILs, which indicates that it is highly soluble in the latter. In summary, our study demonstrated that 1,3-dialkylimidazolium acetates displayed stronger binding interactions with cellulose and lignin, as compared to formates, and thus have superior potential to fractionate these polymers from lignocellulosic feedstocks.

Switchgrass extractives to mitigate Escherichia coli O157:H7 and Salmonella enterica serovar Typhimurium contamination of romaine lettuce at pre- and postharvest.

The antimicrobial potential of switchgrass extractives (SE) was evaluated on cut lettuce leaves and romaine lettuce in planta, using rifampicin-resistant Escherichia coli O157:H7 and Salmonella Typhimurium strain LT2 as model pathogens. Cut lettuce leaves were swabbed with E. coli O157:H7 or S. Typhimurium followed by surface treatment with 0.8% SE, 0.6% sodium hypochlorite, or water for 1 to 45 min. For in planta studies, SE was swabbed on demarcated leaf surfaces either prior to or after inoculation of greenhouse-grown lettuce with E. coli O157:H7 or S. Typhimurium; the leaf samples were collected after 0, 24, and 48 h of treatment. Bacteria from inoculated leaves were enumerated on tryptic soy agar plates (and also on MacConkey's and XLT4 agar plates), and the recovered counts were statistically analyzed. Cut lettuce leaves showed E. coli O157:H7 reduction between 3.25 and 6.17 log CFU/leaf, whereas S. Typhimurium reductions were between 2.94 log CFU/leaf and 5.47 log CFU/leaf depending on the SE treatment durations, from initial levels of ∼7 log CFU/leaf. SE treatment of lettuce in planta, before bacterial inoculation, reduced E. coli O157:H7 and S. Typhimurium populations by 1.88 and 2.49 log CFU after 24 h and 3 h, respectively. However, SE treatment after bacterial inoculation of lettuce plants decreased E. coli O157:H7 populations by 3.04 log CFU (after 0 h) with negligible reduction of S. Typhimurium populations. Our findings demonstrate the potential of SE as a plant-based method for decontaminating E. coli O157:H7 on lettuce during pre- and postharvest stages in hurdle approaches.

Improving UV Curing in Organosolv Lignin-Containing Photopolymers for Stereolithography by Reduction and Acylation.

Despite recent successes in incorporating lignin into photoactive resins, lignin photo-properties can be detrimental to its application in UV-curable photopolymers, especially in specialized engineered resins for use in stereolithography printing. We report on chemical modification techniques employed to reduce UV absorption by lignin and the resulting mechanical, thermal, and cure properties of these modified lignin materials. Lignin was modified using reduction and acylation reactions and incorporated into a 3D printable resin formulation. UV-Vis absorption at the 3D printing range of 405 nm was reduced in all modified lignins compared to the unmodified sample by 25% to ≥ 60%. Resins made with the modified lignins showed an increase in stiffness and strength with lower thermal stability. Studying these techniques is an important step in developing lignin for use in UV-curing applications and further the effort to valorize lignin towards commercial use.

Production and Characterization of High Value Prebiotics From Biorefinery-Relevant Feedstocks.

Hemicellulose, a structural polysaccharide and often underutilized co-product stream of biorefineries, could be used to produce prebiotic ingredients with novel functionalities. Since hot water pre-extraction is a cost-effective strategy for integrated biorefineries to partially fractionate hemicellulose and improve feedstock quality and performance for downstream operations, the approach was applied to process switchgrass (SG), hybrid poplar (HP), and southern pine (SP) biomass at 160°C for 60 min. As a result, different hemicellulose-rich fractions were generated and the chemical characterization studies showed that they were composed of 76-91% of glucan, xylan, galactan, arabinan, and mannan oligosaccharides. The hot water extracts also contained minor concentrations of monomeric sugars (≤18%), phenolic components (≤1%), and other degradation products (≤3%), but were tested for probiotic activity without any purification. When subjected to batch fermentations by individual cultures of Lactobacillus casei, Bifidobacterium bifidum, and Bacteroides fragilis, the hemicellulosic hydrolysates elicited varied responses. SG hydrolysates induced the highest cell count in L. casei at 8.6 log10 cells/ml, whereas the highest cell counts for B. fragilis and B. bifidum were obtained with southern pine (5.8 log10 cells/ml) and HP hydrolysates (6.4 log10 cells/ml), respectively. The observed differences were attributed to the preferential consumption of mannooligosaccharides in SP hydrolysates by B. fragilis. Lactobacillus casei preferentially consumed xylooligosaccharides in the switchgrass and southern pine hydrolysates, whereas B. bifidum consumed galactose in the hybrid poplar hydrolysates. Thus, this study (1) reveals the potential to produce prebiotic ingredients from biorefinery-relevant lignocellulosic biomass, and (2) demonstrates how the chemical composition of hemicellulose-derived sources could regulate the viability and selective proliferation of probiotic microorganisms.

A notodontid novelty: Theroa zethus caterpillars use behavior and anti-predator weaponry to disarm host plants.

Unlike most notodontids, Theroa zethus larvae feed on plants that emit copious latex when damaged. To determine how the larvae overcome this defense, we filmed final instars on poinsettia, Euphorbia pulcherrima, then simulated their behaviors and tested how the behaviors individually and combined affect latex exudation. Larvae initially scraped the stem, petiole, or midrib with their mandibles, then secreted acid from their ventral eversible gland (VEG) onto the abraded surface. Scraping facilitated acid penetration by disrupting the waxy cuticle. As the acid softened tissues, the larvae used their mandibles to compress the plant repeatedly, thereby rupturing the latex canals. Scraping, acid application, and compression created withered furrows that greatly diminished latex exudation distal to the furrows where the larvae invariably fed. The VEG in notodontids ordinarily serves to deter predators; when attacked, larvae spray acid aimed directly at the assailant. Using HPLC, we documented that the VEG secretion of T. zethus contains 30% formic acid (6.53M) with small amounts of butyric acid (0.05M). When applied to poinsettia petioles, the acids caused a similar reduction in latex outflow as VEG secretion milked from larvae. VEG acid could disrupt latex canals in part by stimulating the normal acid-growth mechanism employed by plants to loosen walls for cell elongation. Histological examination of cross sections in poinsettia midribs confirmed that cell walls within furrows were often highly distorted as expected if VEG acids weaken walls. Theroa zethus is the only notodontid caterpillar known to use mandibular scraping and VEG acid to disable plant defenses. However, we document that mandibular constriction of petioles occurs also in other notodontids including species that feed on hardwood trees. This capability may represent a pre-adaptation that facilitated the host shift in the Theroa lineage onto latex-bearing plants by enabling larvae to deactivate laticifers with minimal latex contact.

A tough and sustainable fiber-forming material from lignin and waste poly(ethylene terephthalate).

In this report we describe repurposing of recycled polyesters as a matrix for lignin-a biorefinery coproduct that is used as a solid fuel and needs to find higher value-to make sustainable high-performance thermoplastic materials. Brittle lignin oligomers, isolated from plant biomass, require a low-melting host polymer matrix to form a rigid and tough renewable material. We demonstrate controlled lignin dispersion and interfacial interactions in softened recycled polyethylene terephthalate (PET) using a simple solvent-free, melt-blending technique. To avoid lignin degradation and devolatilization during melt processing, it was thermally treated. Tall oil fatty acid was used to enable PET processability at low enough temperature to accommodate lignin without charring. Chemical analysis reveals reduction of aliphatic hydroxyl content from 2 mmol g-1 to 1.63 mmol g-1 and an increase of total phenolic hydroxyl moieties from 5.86 to 6.64 mmol g-1 and cleavage of ß-O-4 ether linkages due to thermal treatment. Structural transformation of lignin macromolecules during heat treatment was further confirmed by an increase in molar mass and improved thermal stability. Interfacial interactions between lignin and PET were assessed from mechanical properties and thermal analyses. Thermal treatment not only helps to improve the stability of lignin but also slightly reduces the size of the dispersed lignin domains via favored interfacial interactions with the PET matrix. These methods improve mechanical properties of the material. Further, incorporation of lignin in the plasticized PET matrix increases the ductility in the blended products. The method we discuss here utilizes industrial wastes and co-products, and it does not require solvent or toxic chemicals during the reactive extrusion process that yields complete conversion to products.

Lignin-Containing Photoactive Resins for 3D Printing by Stereolithography.

Generating compatible and competitive materials that are environmentally sustainable and economically viable is paramount for the success of additive manufacturing using renewable materials. We report the successful application of renewable, modified lignin-containing photopolymer resins in a commercial stereolithography system. Resins were fabricated within operable ranges for viscosity and cure properties, using up to 15% modified lignin by weight. A 4-fold increase in ductility in cured parts with higher lignin concentration is noted compared to commercial stereolithography resins. Excellent print quality was seen in modified lignin resins, with good layer fusion, high surface definition, and visual clarity. These materials can be used to generate new products for additive manufacturing applications and help fill vacant material property spaces, where ductility, sustainability, and application costs are critical.

Effects of Oligosaccharides Isolated From Pinewood Hot Water Pre-hydrolyzates on Recombinant Cellulases.

Loblolly pine residues have enormous potential to be the raw material for advanced biofuel production due to extensive sources and high cellulose content. Hot water (HW) pretreatment, while being a relatively economical and clean technology for the deconstruction of lignocellulosic biomass, could also inhibit the ensuing enzymatic hydrolysis process because of the production of inhibitors. In this study, we investigated the effect of oligosaccharide fractions purified from HW pre-hydrolyzate of pinewood using centrifugal partition chromatography (CPC) on three recombinant cellulolytic enzymes (E1, CBHI and CBHII), which were expressed in the transgenic corn grain system. The efficiency of recombinant enzymes was measured using either a 4-methylumbelliferyl-ß-D-cellobioside (MUC) or a cellulose-dinitrosalicylic acid (DNS) assay system. The results showed that HW pre-hydrolyzate CPC fractions contain phenolics, furans, and monomeric and oligomeric sugars. Among CPC fractions, oligomers composed of xylan, galactan, and mannan were inhibitory to the three recombinant enzymes and to the commercial cellulase cocktail, reducing the enzymatic efficiency to as low as 10%.

Sustainable Hydrogels Based on Lignin-Methacrylate Copolymers with Enhanced Water Retention and Tunable Material Properties.

Synthesizing lignin-based copolymers would valorize a major coproduct stream from pulp and paper mills and biorefineries as well as reduce the dependence on petrochemical-based consumer goods. In this study, we used organosolv lignin isolated from hybrid poplar ( Populus trichocarpa × P. deltoides) to generate lignin-containing methacrylate hydrogels. The copolymer hydrogels were synthesized by first grafting 2-hydroxyethyl methacrylate (HEMA) onto lignin (OSLH) via esterification and then by free radical polymerization of OSLH with excess HEMA. The copolymer hydrogels were prepared with different stoichiometric ratios of OSLH (e.g., 0, 10, 20, and 40 wt %) with respect to HEMA. Copolymerization with OSLH led to an increase in cross-linking density, which in turn enhanced the hydrogel's material properties; we report up to 39% improvement in water retention, 20% increase in thermostability, and up to a 3 order increase in magnitude of the storage modulus ( G'). The copolymer's properties, such as water retention and glass transition temperature, could be tuned by altering the percent functionalization of lignin OH groups and the ratio of OSLH to HEMA.

Current aspects of Salmonella contamination in the US poultry production chain and the potential application of risk strategies in understanding emerging hazards.

One of the leading causes of foodborne illness in poultry products is Salmonella enterica. Salmonella hazards in poultry may be estimated and possible control methods modeled and evaluated through the use of quantitative microbiological risk assessment (QMRA) models and tools. From farm to table, there are many possible routes of Salmonella dissemination and contamination in poultry. From the time chicks are hatched through growth, transportation, processing, storage, preparation, and finally consumption, the product could be contaminated through exposure to different materials and sources. Examination of each step of the process is necessary as well as an examination of the overall picture to create effective countermeasures against contamination and prevent disease. QMRA simulation models can use either point estimates or probability distributions to examine variables such as Salmonella concentrations at retail or at any given point of processing to gain insight on the chance of illness due to Salmonella ingestion. For modeling Salmonella risk in poultry, it is important to look at variables such as Salmonella transfer and cross contamination during processing. QMRA results may be useful for the identification and control of critical sources of Salmonella contamination.

Applications of Trametes versicolor crude culture filtrates in detoxification of biomass pretreatment hydrolyzates.

Laccases have wide range of substrate specificity and find applications from pulp industry to waste water remediation. Laccases have also been used in combined pretreatment of biomass hydrolyzates to remove enzymatic and fermentation inhibitors. In this study, laccase production by Trametes versicolor strains isolated from different regions of the United States was induced using copper salts. T. versicolor crude culture filtrates (CCF), without any purification step, were tested for removal of model inhibitor compounds as well as in poplar and rice straw pretreatment hydrolyzates. Phenolic inhibitors were removed by 76% and 94% from the dilute acid hydrolyzates of rice straw and poplar, respectively, when incubated with the CCF for 12h, at room temperature. Xylo-oligosaccharide concentrations present in rice straw hydrolyzates were reduced by 64% when incubated with T. versicolor CCF. T. versicolor CCF could be a low cost technology for decreasing enzymatic and fermentation inhibitors.

Characterization of Rice Straw Prehydrolyzates and Their Effect on the Hydrolysis of Model Substrates Using a Commercial endo-Cellulase, ß-Glucosidase and Cellulase Cocktail.

Pretreatment and enzymatic saccharification are two major upstream processes that affect the economic feasibility and sustainability of lignocellulosic biofuel production. Cellulase-inhibiting degradation products, generated during dilute acid pretreatment, increase enzyme usage, and therefore, it is essential to mitigate their production. In an attempt to elucidate the most deleterious degradation product to enzymatic hydrolysis, hydrolyzates were generated from rice straw, and their effect on enzyme activity was determined. Ground rice straw was subjected to the following pretreatments having a combined severity factor of 1.75: T1-160 °C, pH 1.7; T2-180 °C, pH 2.25; and T3-220 °C, pH 7.0. The liquid prehydrolyzates were freeze-dried, and their inhibitory effects on the activities of a commercial cellulase cocktail, endo-cellulase, and ß-glucosidase were determined using filter paper, carboxymethyl cellulose, and cellobiose, respectively. Addition of 15 g L-1 of T1, T2, or T3 freeze-dried prehydrolyzates resulted in 67%, 57%, and 77% reduction in CMC-ase activity of endo-cellulase, respectively. In the presence of 35 g L-1 of T1, T2, or T3 prehydrolyzates, the filter paper activity of the cellulase cocktail was reduced by 64%, 68%, and 82%, respectively. Characterization of the freeze-dried prehydrolyzates showed that T3 had significantly higher xylo-oligosaccharides and total phenolic content than T2 and T1.